Fire Performance of 3D Printing Wall in Simplified Heating Test

Kibeom Ju; Byunghyun Ryu

doi:10.14481/jkges.2023.24.11.11

All Issue

2023 Vol.24, Issue 11 Preview Page Next Page

Fire Performance of 3D Printing Wall in Simplified Heating Test 간이 내화시험에 의한 3D 프린팅 벽체의 내화 성능에 관한 연구

1 November 2023. pp. 11-17

PDF XML

Abstract

In recent construction research, the focus has primarily been on developing 3D printers and construction-specific materials. 3D printing technology in construction is growing rapidly due to its potential benefits. However, there's a notable lack of research on the fire performance of 3D Printed Concrete (3DPC) walls. This study addresses this gap by investigating how 3DPC walls respond to controlled heating conditions in a simplified test. The research aims to provide crucial insights into the behavior of 3D-printed mortar composite walls when exposed to fire. The findings have the potential to enhance safety and reliability in 3D printing technology within the construction industry. Furthermore, it could contribute to improving the fire safety standards of architectural structures and expand the use of 3D printing in future construction projects.

Keywords

3D printed concrete composite wall panels

Fire performance

Simplified heating test

Temperature rise

최근 건설 3D 프린팅 분야의 연구는 주로 장비와 재료에 집중되고 있다. 건설 분야에서 3D 프린팅 기술은 무인시공 등 경제적인 이점으로 인해 빠르게 성장하고 있지만 건축물의 안전을 확보하기 위한 3D 프린팅 건축물의 화재 성능에 대한 연구는 상대적으로 부족한 상황이다. 본 연구는 간이 내화시험에 의한 3D프린팅 벽체의 내화 성능을 평가하고 화재에 노출된 3D 프린팅 벽체의 차열성 및 차염성에 대하여 검토하였다. 이 연구 결과는 건설 산업에서 3D 프린팅 기술의 안전성과 신뢰성을 향상하는 데 기여할 수 있을 뿐만 아니라, 건축 구조물의 화재 안전 기준을 향상하고 미래 건설 프로젝트에서 3D 프린팅 기술의 활용을 확대할 수 있는 잠재력을 가지고 있다.

키워드

3D프린팅 벽체

화재 성능

간이 내화시험

온도상승

References

Buswell, R.A., Leal de Silva, W.R., Jones, S.Z. and Dirrenberger, J. (2018), 3D printing using concrete extrusion: a roadmap for research, Cem. Concr. Res. 112, pp. 37~49. 10.1016/j.cemconres.2018.05.006

Feng, P., Meng, X., Chen, J.F. and Ye, L. (2015), Mechanical properties of structures 3D printed with cementitious powders, Constr. Build. Mater. 93, pp. 486~497. 10.1016/j.conbuildmat.2015.05.132

Hertz, K.D. (2003), Limits of spalling of fire-exposed concrete, Fire Safety Journal, Volume 38, Issue 2, pp. 103~116 10.1016/S0379-7112(02)00051-6

Jeon, K.S., Sim, S.R. and Lee, Y.D. (2023), Evaluation of fire resistance performance of polymer modified cement mortar using polypropylene fiber, Journal of The Korea Institute of Building Construction, Vol. 23, No. 2, pp. 133~142.

Jeong, Y.S., Lee, I.K., Min, G.H., Kim, K.H. and Kim, W.S. (2023), Removal area of deteriorated concretes for concrete repairs, Journal of the Korea Concrete Institute, Vol. 35, No. 1, pp. 59~69. 10.4334/JKCI.2023.35.1.059

Jung, U.I., Kim, B.J. and Kim, J.M. (2016), Heating experiment of fireproof board using the dry process bottom ash and oyster shell, Journal of the Korea Institute of Building Construction, Vol. 16, No. 3, pp. 59~69. 10.5345/JKIBC.2016.16.3.193

Kim, D.J., Kang, S.G., Kwon, Y.J., Lee, J.Y. and Harada, K. (2012), An experimental study on the themal properties of high strength concrete exposed to high temperature, Journal of the Korean Society of Hazard Mitigation, Vol. 12, No. 6, pp. 87~92. 10.9798/KOSHAM.2012.12.6.087

Seo, C.H. (2003), Fire-preventive material, Journal of the Korea Institute of Building Construction, Vol. 3, No. 2, pp. 56~62. 10.5345/JKIC.2003.3.2.056

Wu, P., Wang, J. and Wang, X. (2016), A critical review of the use of 3-D printing in the construction industry, Autom. Constr. 68, pp. 21~31. 10.1016/j.autcon.2016.04.005

Information

Publisher :Korean Geo-Environmental Society
Publisher(Ko) :한국지반환경공학회
Journal Title :Journal of the Korean Geo-Environmental Society
Journal Title(Ko) :한국지반환경공학회 논문집
Volume : 24
No :11
Pages :11-17
Received Date : 2023-09-11
Revised Date : 2023-09-16
Accepted Date : 2023-10-04
DOI :https://doi.org/10.14481/jkges.2023.24.11.11

Journal of the Korean Geo-Environmental Society ISSN:1598-0820(Print) 2714-1233(Online) 한국지반환경공학회 논문집

All Issue