All Issue

2024 Vol.25, Issue 6 Preview Page
Axial Stress Evaluation of Bundle Nails in Smart Construction

스마트 건설기반 번들네일의 축응력 평가

Donghyuk Lee1*
,
Jaekoo Ryu2
이 동혁1*
,
류 재구2
1Lecturer, Department of Fire Protection Engineering, Sanji University
2CEO, Hanwool E&C
*Corresponding Author
1 June 2024. pp. 13-17
PDF XML Citation
Abstract

The general soil nailing method, which is currently used domestically and internationally to stabilize the slopes of sandy slopes, is to form a kind of gravity-type retaining wall by drilling the ground and grouting it with a single steel bar. This method can reduce construction costs, ease of construction, relative strength and displacement, and is highly efficient. The difference between grouting and rebar adhesion to the yield pullout force and the difference between the amount of deformation in relation to the same pullout resistance was analyzed through field tests to identify engineering excellence, and in terms of construction cost, the reduction effect was evaluated by analyzing the difference in the number of drillings and the impact on the overall construction cost, such as material cost, when the same strength constant is applied to the ground with the same resistance.

Keywords
Soil nailing
Adhesion
Deformation
Reduction of construction costs
Smart construction

현재 국내외적으로 토사사면의 사면안정을 위해 사용하고 있는 일반 Soil Nailing은 지반을 천공 후 단일 철근을 활용, 그라우팅하여 일종의 중력식 옹벽을 형성하여 사면의 안정을 도모하고 있다. 이러한 공법을 공사비 절감과 시공의 용이성, 상대적인 강도와 변위면에서 우수한 효율을 낼 수 있는 공법이다. 동일한 공종으로 진행하되 단일 철근을 다발철근으로 변경하여 활용할 경우 항복 인발력에 대한 그라우팅과 철근의 부착력 차이, 동일한 인발저항 대비 변형량의 차이를 현장시험을 통해 분석하여 공학적 우수성을 규명하고 공사비 측면에서 강도정수가 동일한 지반에 대하여 저항력이 동일하게 적용할 경우, 천공수의 차이와 재료비 등 전체 공사비에 미치는 영향분석을 통해 절감효과의 비교를 분석하여 평가하였다.

키워드
쏘일네일링
부착
변위량
공사비 절감
스마트 건설
References
1

Bang, Yoonkyung, Yang, Younghoon, Suh, Jeeweon, Yoo, Namjae and Kim, Hongtaek (2015), A study on the application of bamboo soil nailing system through experimental construction, Journal of the Korean Geo-Environmental Society, Vol. 16, No. 3, pp. 23~34 (In Korean).

10.14481/jkges.2015.16.3.23
2

Juran, I., Baudrand, G., Farrag, K. and Elias, V. (1990), Kinematical limit analysis for design of soil-nailed structures. Journal of the Geotechnical Engineering, ASCE, Vol. 116, No. 1, pp. 54~73.

10.1061/(ASCE)0733-9410(1990)116:1(54)
3

Park, Hyun-Gue and Lee, Kang-Il (2016), Estimation of ultimate pullout resistance of soil-nailing using nonlinear, Journal of Korean Geosynthetics Society, Vol. 15, No. 2, pp. 65~75 (In Korean).

10.12814/jkgss.2016.15.2.065
4

Park, Jeaman, Park, Duhee, Lee, Jongkwon and Jung, Kyoungsik (2021), Evaluation of the behavioral characteristics of soil nail using high-strength steel pipe through field test, Journal of the Korean Geo-Environmental Society, Vol. 22, No. 2, pp. 5~13 (In Korean).

5

Schlosser, F. (1982), Behavior and design of soil nailing, Proc., Symposium for Recent Developments in Ground Improvement Techniques, Bangkok, Thailand, pp. 399~413.

6

Seo, Hyung-Joon, Lee, Gang-Hyun, Park, Jeong-Jun and Lee, In-Mo (2012), Optimization of soil-nailing designs considering three failure modes, Journal of the Korean Geotechnical Society, Vol. 28, No. 7, pp. 5~16 (In Korean).

10.7843/kgs.2012.28.7.5
7

Shen, C.K., Bang, S. and Herrmann, L.R. (1981), Ground movement analysis of an earth support system, Journal of the Geotechnical Engineering, ASCE, Vol. 107, No. 12, pp. 512~374.

10.1061/AJGEB6.0001216
8

Son, Byeong-Doo, Lim, Heui-Dae and Park, Joon-Mo (2015), Estimation of LRFD resistance bias factors for pullout resistance of soil-nailing, Journal of the Korean Geotechnical Society, Vol. 31, No. 10, pp. 5~16 (In Korean).

10.7843/kgs.2015.31.10.5
9

Stocker, M. F., Korber, G. W., Gässler, G. and Gudehus, G. (1979), Soil Nailing. C. R. Coll. Int. Reinforcement Des Sois. Paris, pp.469~474

10

Stocker, M. F. and Riedinger, G. (1990), The bearing behaviour of nailed retaining structures, ASCE Geotechnical Special Publication, No. 25, New York, pp. 612~628.

11

You, Kwang-Ho (2014), Reinforcing effect of a soil nailing on plane failure of a slope by comparing finite difference analysis with limit equilibrium analysis, Journal of the Korean Geotechnical Society, Vol. 30, No. 11, pp. 5~15 (In Korean).

10.7843/kgs.2014.30.11.5
12

You, Kwang-Ho and Kim, Tae-Won (2019), Evaluation of domestic and foreign design standards for soil nailing method by analysis of slope restoration case, Journal of the Korean Geo-Environmental Society, Vol. 20, No. 11, pp. 11~22 (In Korean).

13

You, Kwang-Ho and Min, Kyoung-Sun (2013), Influence of soil nailing angle on slope reinforcement effect by finite difference analysis, Journal of the Korean Geotechnical Society, Vol. 29, No. 8, pp. 27~36 (In Korean).

10.7843/kgs.2013.29.8.27
Information
  • Publisher :Korean Geo-Environmental Society
  • Publisher(Ko) :한국지반환경공학회
  • Journal Title :Journal of the Korean Geo-Environmental Society
  • Journal Title(Ko) :한국지반환경공학회 논문집
  • Volume : 25
  • No :6
  • Pages :13-17
  • Received Date : 2024-04-09
  • Revised Date : 2024-04-12
  • Accepted Date : 2024-05-05
  • DOI :https://doi.org/10.14481/jkges.2024.25.6.13
Journal Informaiton Journal of the Korean Geo-Environmental Society Journal of the Korean Geo-Environmental Society
Online Submission
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • orcid
Journal Informaiton Journal Informaiton - close